When you ever plan to mount one thing to the wall that’s even remotely heavy, you’ll want to make use of drywall anchors if a stud isn’t out there. Listed here are the several types of drywall anchors, and how you can use every one.
What Precisely Are Drywall Anchors?
Ideally, you need to cling heavy issues out of your partitions through the use of the studs because the anchor. Nevertheless, this isn’t all the time attainable, particularly if there’s a precise location you need one thing hung and there’s not a stud behind it.
Sadly, should you have been to only drive a screw into drywall, the brittleness of the drywall materials wouldn’t permit the threads of the screw to completely chew into the drywall, making the holding power of the screw fairly weak general.
That is the place drywall anchors can save the day. A drywall anchor goes between the screw and the drywall, biting into the drywall rather more successfully than a screw would. Then, you screw into the anchor, so every part stays in place.
Relying on what you’re hanging or mounting, you might need to use a selected sort of drywall anchor, and there are a number of to select from.
What You Want
Earlier than we get began, although, there are a couple of instruments you’ll want, most of which you in all probability have already got:
- A hammer
- An influence drill and full drill bit set
- Drywall anchors
Make completely positive you get a drill bit set and never only one or two drill bits. You want the totally different sizes since drywall anchors are available all totally different styles and sizes.
With that each one out of the best way, let’s get began!
Enlargement Anchors
A majority of these anchors are the most typical, and once you consider drywall anchors, you in all probability consider these. They’re small little plastic anchors which might be pretty primary, and also you’ll see them included in most shelf kits that you could purchase on the retailer.
They’re referred to as enlargement anchors as a result of whenever you drive within the a screw, they broaden and push towards the drywall in an effort to chew into it. They’re not one of the best sort to make use of, since they’re not capable of maintain an entire lot of weight (perhaps 10 to 20 kilos at most), however they’re nice for heavier image frames and small cabinets. Anchors will typically listing the holding power most on the packaging, but when not, it’s greatest to play it protected and go together with a stronger anchor (like those mentioned under) when you’re not sure.
In any case, to make use of an enlargement anchor, begin by drilling a gap within the drywall that’s roughly the identical diameter because the anchor.
After that, gently hammer the anchor into the wall. That is the place you’ll discover out of the opening you drilled is both too massive or too small. You need the anchor to go in pretty easily with a little bit of resistance, however you don’t need to be preventing with it to get it to go in.
Hammer the anchor in till it’s flush with the wall.
Subsequent, take your screw and start driving it into the anchor. Make sure that to place your shelf (or no matter you’re mounting) as much as the place you need it after which drive within the screw. Nevertheless, in the event you’re simply hanging a mirror or an image body, you possibly can drive the screw in by itself and cling the mirror afterward. Cease driving when the screw turns into comfortable.
That is what the anchor seems like on the opposite aspect. As you'll be able to see, the anchor expanded fairly a bit as a way to create a cosy match for the screw.
Threaded Anchors
Typically referred to as Zip-Its, threaded anchors are type of like bigger screws. They arrive with a lot bigger threads than screws do, permitting them to actually chew into the drywall and create a reasonably good maintain.
Nevertheless, they solely have just a little bit extra holding energy than enlargement anchors, so they need to nonetheless solely be used for mild obligation purposes. Nevertheless, I feel they’re a bit simpler to put in.
Begin by drilling a gap concerning the measurement of the tip of the threaded anchor. Then, take your energy drill and drive the threaded anchor into the drywall identical to you'd with a traditional screw.
As with the enlargement anchor, drive it in till it sits flush with the drywall.
Subsequent, take your screw and drive it into the anchor, stopping when it feels comfortable. That is what it appears like on the opposite aspect. Typically the tip will break off completely, typically not.
Molly Bolts
Now we’re moving into the actually robust drywall anchors, and these are ones that you should use on just about any materials—not simply drywall. So in case you have a concrete wall that you simply need to mount one thing on, you need to use these to get the job accomplished.
Molly bolts are straightforward to put in, however you additionally have to just remember to get the best measurement for the thickness of your wall. You’ll see why in a minute.
To put in certainly one of these, drill a gap with the identical diameter because the molly bolt. Then hammer it in till it sits flush with the wall. Some molly bolts have tooth on the top that dig into the drywall, so just remember to hammer it in all the best way in order that these tooth can do their job.
Subsequent, unscrew the screw that’s pre-installed onto the molly bolt till it’s utterly out.
Whenever you’re able to mount or cling one thing, re-install the screw by driving it again in. You’ll really feel just a little resistance at first, however that’s simply the molly bolt mechanism slowly tightening down. Cease if you’re met with much more resistance and snugness.
Right here’s what the opposite aspect seems to be like. As you'll be able to see, this molly bolt is just too huge for my 1\/2-inch drywall, as these 4 little wings ought to be pressed up towards the wall in an effort to create that robust maintain. So be sure to get the best measurement molly bolts if you’re on the retailer. When you’re not sure, simply ask an worker for assist.
Toggle Bolts
Toggle bolts are just about the strongest wall anchors you should purchase, however they’re vastly totally different in relation to putting in them.
First, begin by drilling a gap that’s large enough for the toggle to squeeze by way of when it’s folded down. Normally, this gap will probably be giant sufficient for the top of the screw to fall by means of, so these are actually solely good for mounting cabinets or different gadgets the place they will act as a washer of types and cease the screw from going throughout.
You’ll additionally need to just remember to feed the toggle bolt onto the merchandise you’re mounting first by unscrewing the toggle from the screw, feeding the screw via the shelf mounting gap, after which screwing the toggle again on. From there, fold down the toggle and feed it by means of the opening you drilled within the wall (as pictured above). As soon as contained in the wall, the toggle will spring again open.
From there, start screwing down the bolt. You’ll want to tug gently on the bolt as you’re screwing it in to stop the toggle from spinning round with the bolt. You could want a second pair of palms that will help you with this.
Tighten it down till it’s comfortable and also you’ll be able to go. Pictured above is what the opposite aspect seems like, and also you’ll discover that the toggle is pressed firmly towards the drywall to carry the bolt in place.
from TechFishNews http://ift.tt/2hi5Grd
Comments
Post a Comment